Clicky

How To Improve A Church’s Sound System – Viral Believer
Skip to content

This article may contain links to affiliate offers. If you purchase on the website recommended, we may earn a small commission at no charge to you. Read our affiliate disclosure here.

How To Improve A Church’s Sound System

Tags:

How can you improve the sound quality of your church’s PA system? Understanding the workings of your equipment is key. You can improve your sound by learning how to set up and adjust the mixer’s settings.

This article will show you how to improve the sound system in a church.

Upgrade your equipment by upgrading the speakers. High-quality speakers will ensure your sound is clear and free from unwanted noise. These solutions may not be enough to improve sound quality. You have two options: graphic equalizers or compressors.

black audio mixer

Understanding how your equipment works

Many audio mixers offer a wide range of effects and settings that can be applied to your master sound. It’s easy to stay with what you know and not consider using these settings to enhance the sound. Amateur sound engineers might not be able to understand the effects and settings.

You may not need to upgrade your equipment. Instead, you might just want to understand better how it works. You can improve the sound quality by tweaking the mixer settings, moving the microphones and speakers, or adjusting the volume.

Reposition your loudspeakers, and check their volume settings. This simple step can make all the difference. The sound bounces off walls and other surfaces. You can reduce feedback, echoes, hums, and other problems by placing the speakers in the best spot.

First, ensure that the speakers face the audience. You should be able to see the speakers from wherever you are sitting in the church. Any other structures shouldn’t block them.

The height of the speakers can have a major impact on speaker placement. This will affect the vertical coverage of your speakers. People in the back should hear the same sound as those in front. This can often mean that the speakers must be placed higher and angled toward the congregation.

You don’t have to mount the speakers from the ceiling. There are inexpensive adjustable speaker stands that provide greater height and more control over vertical coverage.

You must ensure that the person responsible for the sound system in your church understands how to use the mixer. There are training courses specifically designed for this purpose. A professional sound engineer will be able to explain how the volume, EQ, special effects, and volume controls all affect the overall sound.

Upgrade Your Loudspeakers

The sound quality may not be as good as it could be. You don’t necessarily need to buy new equipment. You don’t have to replace everything. Instead, upgrade the speakers.

The cost of upgrading speakers is less than other equipment, such as high-quality mixers.

You must first choose between active and passive speakers when choosing new speakers. Passive speakers need an external power source, such as a power amplifier. The power amplifier amp amplifies the sound signal from a mixer before it is sent to the speaker.

An amp is not required for active speakers. They are powered by electricity. These speakers are more expensive, but they remove the need to run longer cables between passive speakers and amplifiers.

Also, pay attention to the coverage angle. Manufacturers usually describe the coverage angle as narrow or wide. Broad coverage is best when there are a few speakers, or you must ensure everyone hears the sound.

To boost the sound, add additional components.

A church’s basic sound system may not require much equipment. The sound may be sent from the microphones to a mixer, power amplifiers, or powered speakers.

You can increase the control of the sound by adding an equalizer between the mixers and the amps or a compressor between the mic and the mixer.

Graphic equalizers are used to control the master mix sent to the loudspeakers. They do not adjust the frequency of individual mics.

The settings can be used to adjust the frequency levels. This allows you to turn off unwanted frequencies and emphasize the desirable frequencies.

Playing familiar music through the sound system is the best way to adjust these frequencies. Play a track you are familiar with to hear the frequencies.

Changing the volume can lower the frequency causing the hissing or hum.

To isolate the problem, increase the frequency. The problem will get worse if you increase the frequency. After identifying the problem, you can reduce the gain to eliminate the sound.

The microphones can pick up sudden volume increases, which could be a problem. You might have someone in your choir who increases his volume occasionally. Sudden volume increases can cause feedback and other undesirable noises.

A compressor can solve this problem. The compressor compresses the loudest signals to allow you to increase volume without worrying about sudden surges.

Conclusion: How to Improve a Sound System

There are many ways to correct the problem if you are unhappy with the sound from your church’s loudspeakers. First, ensure you’re using all settings and features on your soundboard. You might consider taking a training course to understand how your mixer works fully.

Next, upgrade your speakers. A speaker with the correct coverage can deliver better sound in the church. A compressor and graphic equalizer may be useful additions to your sound system. The compressor can be used to produce even sound.

These tips will help improve the sound quality of your church’s PA system. If the sound quality is not as good as you expected, you might need to replace your soundboard or mics.

Sources

Pastor Duke Taber
Pastor Duke Taber

Pastor Duke Taber

All articles have been written or reviewed by Pastor Duke Taber.
Pastor Duke Taber is an alumnus of Life Pacific University and Multnomah Biblical Seminary.
He has been in pastoral ministry since 1988.
Today he is the owner and managing editor of 3 successful Christian websites that support missionaries around the world.
He is currently starting a brand new church in Mesquite NV called Mesquite Worship Center, a Non-Denominational Spirit Filled Christian church in Mesquite Nevada.