Lighting the Stage for Your Church
Viral Believer is reader-supported. We may earn a small fee from products we recommend at no charge to you. Learn More
It is important to ensure that your church has the best lighting. How can you set up stage lighting in a church? If you’re willing to look at the details, it is not as difficult as you might think. You will need to locate a reliable power source, establish the desired stage lighting position, set up the fixtures, and finally, the stage lighting controller. Your specific needs will determine the best way to proceed.
First, you must determine your needs to understand how to set up stage lighting. How your church is set up will affect how you position your lights. You should also consider what purpose you are setting up lights for. You will need one set of lights if you’re setting up church services. However, a church play may require a different set of lights. Although there is much to consider, it shouldn’t be difficult to manage if you just take each step one at a time.
Power is Important
You must first understand that power is vital. It doesn’t matter what type of stage lighting fixture you use, they must be properly powered. Many of the stage lighting fixtures used by churches will need dimmable power. This is usually required when you use LED intelligent lighting fixtures.
You must ensure that the power you use is the correct type for your fixtures. This will allow you to convert your system from non-dimmable to dimmable power. Dimmer racks are a great way to accomplish this. This will enable you only to run the power once and give you more flexibility with what you can do with the outlets. It is easy to slide a new module in place, so it might be worth taking the time.
How to determine the Stage Lighting Positions
The most important thing about stage lighting is the position of the lights. So that your stage lighting looks great, you want to make the most of it. You have a few options. There are two options. You can place the lights in the auditorium at the back or above the stage. You should find it easy to choose from either of these options.
You can make stage lighting simple by using spotlights at the back. These lights are very useful and can be operated from the auditorium’s back. These lights can be used to highlight certain areas of the stage, such as the pulpit and your choir area. This is a great idea if you like simplicity.
It is possible to use moving lights in the auditorium if they are placed at the back. They can be used to simulate a concert setting and are very popular among churches with modern praise and worship groups. These can be attached to a board or switched on from the back of your church’s auditorium. Traditional lighting is usually located towards the front of the church.
It is easy to install traditional lights above the pulpit or stage area. To hang the lights from the ceiling, you may need to set them up. This may not be possible, depending on how large your church is. Some churches have less headroom. Standing floor lights are a good choice in this case. It was also mentioned in the beginning that the answers to your questions will come down to your individual needs.
You can find everything you need in our list of top-rated stage lights for churches. Either you choose to work with a company that regularly provides lighting for churches, or you can buy standalone lights and build your own system. You will get a great setup if you put in the work.
Setup of Fixtures and the Controller
You will now need to install the fixtures and control your lighting system. This will involve wiring the lights into the church and positioning them correctly. You may need to hire an electrician if you don’t have someone familiar with these tasks. It is crucial to ensure that everything is properly set up. You want to do this in the safest manner possible. It won’t be difficult to have everything in place with the fixtures.
It shouldn’t be difficult to set up the controller. A simple board and all the lights connected to it can be purchased. You can then turn the lights on or off as you wish. This is especially important if you want to use the moving lights at your sanctuary’s back. It will be easy to control the lights using the controller. Most churches place the board in a booth at the back of the church.
Some people prefer to place things on the sides of the stage. You can put your sound equipment and light controller board on the side if you have enough space. Churches usually keep this area out of view to make things look as beautiful as possible. You will have no problems moving forward if you buy a board that is simple to understand.
Conclusion – The Best Way to Set Up Stage Lighting
It isn’t as difficult as you might think. You just need to put some effort into it, and you’ll be able to get it done. The new lighting arrangement you choose will make your church look amazing. It is possible to ensure everyone in the congregation is happy with the final results if you put in the effort.
We hope you found this article helpful in setting up stage lighting.
- Zach Kincaid. Top 10 Church Lighting System Providers Design. Retrieved 1/25/19 from: https://www.sharefaith.com/blog/2016/05/church-lighting-system-providers-design/